The dry ash bulk equipment at the bottom of the warehouse is mainly composed of manual rod valve, electric sector valve, winch device, telescopic discharge device, dust collection hose, capacitive limit switch, electronic control system and other parts. Users can also choose clinker bulk equipment on the warehouse side.

Working principle
When the transport tool enters the loading position of the dry ash bulk machine, the rod valve is opened corresponding to the number of rods. Press and hold the "down button" of the control cabinet. After the unloading head of the dry ash bulk machine of Hongyun Machinery is in place, the power supply to the lifting motor will be automatically disconnected. Press the "loading button" to enter the unloading state. The auxiliary equipment will start to work accordingly and unload. The generated dust passes through the feed hopper and enters the dust collector for purification by the telescopic dust collection hose. When the material in the lower feed head is full, the lower feed head will rise while alarming. The rising distance must be set before unloading. If the rising distance 1 meter, then adjust the time of the time relay to T=I/V. During the rising process, charging is always in progress. When the lower material head is full, repeat the above action. After reaching the full position, press the stop button to reversely brake the electric vibrator, or close the sector valve to stop the material loading. After parking, you can press the up button to keep the lower hopper away from the material at a certain distance to ensure that the transportation tool is shifted, and then align it with the second unloading station. until the entire silo is filled.